Select Page

Capsize a:w

A skipper should know how their boat will cope with rough seas. By working within known limits and understanding the risks, then the chances of a capsize occurring are much reduced.

Safety is all about improving the odds. When considering the odds of a boat capsizing, knowing the limitations of its design and stability are critical. In order to do this, it helps to understand the basic principles of how a boat remains upright.

Basic principles

A boat remains upright because of the way its weight and buoyancy interact. The basic principle of buoyancy is that the upward buoyant force on a body immersed in fluid is equal and opposite to the weight of the fluid that the body displaces. The weight of the fluid displaced is known as displacement and the displaced water has an up thrust, or buoyancy, which is equal to the weight of the boat. The displaced water has a central point, or centre of buoyancy, which varies according to the shape of a boat’s hull and keel.

The centre of buoyancy is not to be mistaken for the centre of gravity. The weight of a boat is distributed along its length, pushing the entire vessel downwards.  All the weight acts downwards through a central point, or centre of gravity, which is similar to the fulcrum or central point of a seesaw.  All the structure and the distribution of weight aboard contribute to a boat’s centre of gravity.

To keep a boat stable in the water and prevent it from toppling over requires the centre of gravity to be low, which is greatly helped by having a deep, heavy keel and an engine below the waterline.

Angle of heel

Stability 1

If a sailing boat heels over in a strong gust of wind or is forced over by a big wave, then it will right itself once the gust or wave has passed. When a boat is upright then the force of gravity is directly opposed to the force of buoyancy.  As the boat heels over the centre of buoyancy moves outwards and acts as a lever does, pushing upwards with an increasing force. This is fine up to a point, but eventually as the boat continues to heel the righting lever effect reduces and eventually is lost and then the boat will capsize and float upside down. This point is known as the Angle of Vanishing Stability (AVS).

Stabilty 2

Boats with a high AVS will resist becoming inverted and return to the upright position quickly in the event of a knockdown. These include narrow, heavy displacement boats with a deep draft which can heel to 120º or more. Once capsized, only a small amount of further rolling moves the hull into the positive righting area and the boat comes back upright. Boats with wide beams and shallow drafts tend to have high initial stability but may capsize at 90º of heel and will not always be self-righting.

Righting moment curve

Righting moment curve

Boat manufacturers publish righting moment curves of their yachts to show the stability characteristics of their designs. In Europe the Recreational Craft Directive (RCD) states that pleasure yachts between 2.5m and 24m must carry builders’ plates to categorize their boats in either Category A (Ocean), B (Offshore) or C (Inshore) and meet minimum standards of stability.

Breaking waves

Rules and regulations are one thing, but the force of steep breaking waves can knock any yacht down in coastal waters, especially if it is caught beam-on. Research has shown that the most significant factor in capsize is whether a wave is breaking or not. If the wave is greater in height than the beam of the boat, then it can easily knock the boat over. Tests carried out at Southampton University in England have shown that almost any boat can be capsized by a wave equal to 55% of the boat’s overall length. Such waves may occur where the seabed suddenly shelves towards the coast, or where wind is blowing against tide.

This research points to the fact that yachts seeking shelter often find themselves in greater danger when approaching harbours than when coping with a storm further out to sea.

Being prepared

If you are well offshore in rough weather, consider your options. If needs be, heave to and ride out a storm as the boat will be more stable and comfortable, but check you have sufficient sea room to drift downwind and are not approaching a lee shore.  Another option is to lie ahull, with no sail up and the helm tied to leeward. If conditions worsen then the next stage is to lie to a sea anchor or drogue, which will prevent the boat from meeting waves beam on and reduce the vessel’s drift rate.

Don’t automatically head for the nearest harbour or your intended destination. Check first what the conditions are likely to be there, by considering the state of the tide, wind direction and whether there are danger areas such as headlands and sand bars to contend with. Check out all the alternatives and be prepared to alter your plans in order to opt for a safe option.

Tips to prevent capsize:

  • Know your boat’s limitations.
  • Don’t overload the boat.
  • Pump the bilges regularly.
  • Keep a generous margin of safety.
  • Know when it is best to yield to conditions, rather than fight them.
  • Avoid areas known for overfalls and tide rips.
  • Avoid being caught beam on to breaking waves.

 

How to predict wind direction and strength by reading a weather chart

Weather charts, also known as surface pressure or synoptic charts, contain a lot of information that helps weather...

Anchoring – getting it right is not always straightforward

If you can set an anchor correctly with confidence and know your boat will be safe in a secure anchorage, then you can rest...

Sailing into a storm

Weather forecasting has become increasingly accurate, but despite this, I was caught out recently by a forecast that considerably underestimated the wind strengths and consequently was sailing single handed in to a Force 8 gale, which proved to be challenging!

Rudders and steering systems – Part 2

One thing all rudders have in common is that they have three main parts that need to be checked: the rudder, or a steerable drive leg in the case of many power boats; the system that joins the rudder to the steering; the steering control itself.

Boatyard Health and Safety

Boat storage facilities are potentially hazardous environments and it is the responsibility of both boat owners and boatyards to ensure that the...

Essential Knots: Bowline

Essential Knots: Bowline Use: Making a secure eye or loop in the end of a rope. Bowlines have many uses on a boat, for example to make a...

Tidal terms and definitions

Getting to grips with tidal terms and definitions can seem a little daunting, even to the most experienced sailors! Here we look at some of the key terms and definitions associated with the language of tides.

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 3 – Preparations

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the third of a 10-part post where solo sailor, Bernie Branfield, shares his first hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Know your Navlights & Shapes – essential for all skippers

Know your Navlights & Shapes International Regulations for Preventing Collisions at Sea (ColRegs) Anyone who is...

Medical Emergency at Sea

How to deal with a medical emergency afloat   If you are planning a boating trip, it is important to have at least one...

Wooden Hulls – Part 1

Traditional wooden boats have a plank on frame construction, a centuries old boat building method that is still in use today. Variations of the traditional method include carvel, clinker and strip planking, which all relate to the way the planking is attached to the frame.

Boat engine fuel system

If engines are installed and serviced correctly then most marine engines are very reliable, but one of the most important parts of the engine to check and service is the fuel system.

The give-way hierarchy at sea – who gives way to whom?

Whatever their size or type, all skippers have a responsibility to avoid collisions with other boats at sea.  It is...

Boat maintenance – what does it involve?

The maintenance of a boat involves things like cleaning, varnishing, painting, polishing, antifouling, servicing the engine, servicing the seacocks, and maintaining the gas and plumbing systems. It all amounts to a fairly considerable amount of work that can’t be ignored if you are to keep your boat in a safe and good condition.

First Aid Afloat – jellyfish stings

  Wherever you are boating in the world I am sure you will be using a pilot guide to aid your navigation. Often in the...

Competent crew skills: arriving and leaving a berth

Skilled boat handling is needed when entering or leaving harbour. Crew tasks include preparing the mooring lines and fenders before docking and...

Rewiring a boat – overcoming the challenges involved

Skippers need to have a basic knowledge of boat electrics, to avoid potential problems and to be able to solve them when they happen.

Understanding marine sealants & adhesives

Sealants, adhesives and adhesive sealantsThere is a bewildering variety of sealants, adhesives and even adhesive sealants available for...

Avoiding collisions at sea – how to stay safe on the water

Boats have many blind spots, including the headsails of sailing boats. Always keep a lookout, stay safe and remember that...

A five day sailing cruise of the Solent, UK

Welcome to our virtual Solent sailing cruise – a five day sail in the south of England from Bosham Quay in Chichester...

Jester Challenge 2022 – Sailing single handed from Plymouth UK to the Azores: Part 5 – Boat Management

Jester Challenge – A modern experiment in old-fashioned self-reliance, self sufficiency, and personal responsibility. This is the fifth of a 10-part post where solo sailor, Bernie Branfield, shares his first hand account of his single-handed, 2022 Jester Challenge, from Plymouth, UK to the Azores, in his 26′ Invicta Mk2, Louisa.

Common marine electrical problems

Most problems with marine electrical systems arise from four possible sources, a lack of maintenance, a poor standard of initial installation, insufficient battery capacity, or ineffective charging systems.
Water ingress is a frequent issue – salt water can corrode contacts very quickly. If connections are not scrupulously clean – or are loose – resistance will be increased, resulting in progressively reduced power.

Engine failure at sea – keeping the boat safe

If the engine stops when you are underway, or your have to shut it down when a warning buzzer sounds, you also need to make sure the boat remains safe. It’s important therefore to recognise situations in which the boat would be immediately put in danger if the engine were to fail.

Wooden Hulls – Part 2

It is important to ensure the essential hull maintenance of a wooden boat is done, even if you are paying others to look after your boat for you. The priority is to prevent rot from taking hold. The protective layers of paint and varnish over wood are far more critical than on GRP boats, where the topsides are painted more for cosmetic reasons.

Sailing & Motoring in Fog

Sailing & Motoring in Fog You can only measure the visibility accurately if sailing & motoring in fog when you have...